PRODUCTS
PPM228-1A cantilever beam load cell
The sensors of this series are fixed at one end and loaded at one end. They have various stress forms, low center of gravity, easy installation and good interchangeability. Suitable for truck scales, electronic scales, hopper scales, etc. Optional built-in amplifier 4-20mA output. It can be used for various ultra-thin electronic truck scales, monorail crane scales, hopper scales, belt scales, mixing stations, etc .; it can also be used for analysis and measurement of strength in various industrial systems, and can also be displayed with control instruments and dynamic and static strain The instrument is used for pressure, weighing and force measurement.
Technical Parameters :

Rated load

0-30kg-20t (Any choice between)

Comprehensive accuracy

0.02%0.03%Linear + hysteresis + repeatability

Sensitivity

2.0mV/V

External transmitter output

4-20mA,0-5VDC,0-10VDC(options

Creep

±0.02%FS/30 min

Zero output

±1%FS

Zero temperature effect

±0.02%FS/10℃

Influence of output temperature

±0.02%FS/10℃

Operating temperature

-20℃-+65℃

input resistance

380±10Ω

Output impedance

350±3Ω

Insulation resistance

>5000MΩ

Safe overload

150%FS

Donor voltage

3-15VDC Suggest

10VDC

Transmitter voltage

11.5-32VDC Suggest

24VDC

Material

Alloy steel or stainless steel

Internal filling

Silicone grease


Definition of wiring :
Dimensions In MM :
Related Products